---
title: "Installing a Wi-Fi booster in a few steps"
description: "Activate, install, and enjoy! Follow our simple step-by-step plan to install your Wi-Fi booster and enjoy a stronger Wi-Fi signal. "
category: "TOESTELHULP"
siteName: "Mobile Vikings"
lang: "en"
canonical: "https://mobilevikings.be/en/support/install-wifi-booster"
---

# Installing a Wi-Fi booster

Activate, install, and enjoy!

## What type of modem do you have?

To provide you with the correct step-by-step plan, we need to know which modem you are using. Check the pictures below to easily see which model is installed in your home.

### B-box 3

### Internet Box

### Internet Box+

## Let’s Install!

**Tab: B-box 3**

1.  **Make sure your Wi-Fi connection is activated**:

    check the button on the back of the Wi-Fi booster. The button should be set to AUTO.

2.  **Turn on the Wi-Fi booster:**

    **2.1.** Plug the Wi-Fi booster’s power cable into a power socket in the same room as the B-box.

    **2.2.** Press the POWER button. The light will turn green. Wait 1 minute until the WPS light turns off.

3.  **Synchronize the Wi-Fi of the B-box with the Wi-Fi booster:**

    **3.1.** Press the WPS button on your B-box for 2 seconds. The synchronization light (WPS) will start blinking.

    **3.2.** Then, within 2 minutes, briefly press the WPS button on the Wi-Fi booster. The lights of both devices will start blinking and then go out after a while.

    **3.3.** Once the synchronization is complete, the light will stay on.

    **3.4.** You can now unplug the Wi-Fi booster and place it in a central location between the B-box 3 and the device that needs to receive the wifi signal.

4.  **Turn the Wi-Fi booster back on:**

    **4.1.** Plug the power cable into a power socket. Make sure the power button is properly pressed.

    **4.2.** The POWER and Link Quality lights will turn green.

    **4.3.** Check if the Link Quality light stays green. If not, place the Wi-Fi booster closer to the B-box.

**Tab: Internet Box**

1.  **Turn on the Wi-Fi booster:**

    **1.1.** Plug the Wi-Fi booster’s power cable into a power socket in the same room as the Internet Box.

    **1.2.** Press the POWER button. The light will turn orange or white.

2.  **Synchronize the Wi-Fi of the Internet Box with the wifi booster:**

    **2.1.** Briefly press the WPS button on your Internet Box. The Wi-Fi light will now turn white.

    **2.2.** Press the WPS button until the positioning light starts blinking white. This may take up to 10 seconds.

    **2.3.** Once the synchronization is complete, the positioning light will turn green. The Wi-Fi button and the power button are now blue.

    **2.4.** You can now unplug the Wi-Fi booster and place it in a central location between the Internet Box and the device that needs to receive the wifi signal.

3.  **Turn the Wi-Fi booster back on:**

    **3.1.** Plug the power cable into a power socket. Make sure the POWER button is properly pressed.

    **3.2.** The Wi-Fi and Power lights will turn blue. The positioning light will turn green.

    **3.3.** Is the positioning light not green? Then place the Wi-Fi booster closer to the Internet Box for better reception.

**Tab: Internet Box+**

1.  **Turn on the Wi-Fi Booster+:**

    **1.1.** Plug the power cable of the Wi-Fi Booster+ into a power socket in the same room as the Internet Box+.

    **1.2.** Press the POWER button. The light will turn orange or white.

2.  **Synchronize the Wi-Fi of the Internet Box+ with the Wi-Fi Booster+:**

    **2.1.** Do this by pressing the WPS button on the Internet Box+. The Wi-Fi light will start blinking white.

    **2.2.** Press the WPS button on the Wi-Fi Booster+ until the positioning light starts blinking white. This may take up to 10 seconds.

    **2.3.** Once the synchronization is complete, the positioning light will turn green and the power light will turn blue. This may take a few minutes.

    **2.4.** You can now unplug your Wi-Fi Booster+ and place it in a central location between your Internet Box+ and the device that needs to receive the wifi signal.

3.  **Turn the Wi-Fi booster back on:**

    **3.1.** Plug the power cable of the Wi-Fi Booster+ into the power socket. Make sure the POWER button is properly pressed.

    **3.2.** The Wi-Fi and power lights will turn blue. The positioning light will turn green.

    **3.3.** Is the positioning light not green? Then place the Wi-Fi Booster+ closer to the Internet Box+ for better reception.